NOPTIC NV3 Mobile Thermal Imaging Camera with Vehicle Spotlight Mount FLIR

$4,095.00
ID:
7095
SKU:
NV3-THERMAL
Availability:
Estimated Lead Time of 2-5 business days
ID:
7095
SKU:
NV3-THERMAL
Availability:
Estimated Lead Time of 2-5 business days
Hide

The NOPTIC’s one and only spotlight mount (patent pending) provides quick pan and tilt capabilities required for successful surveillance. Cheap imitators that move slow, or are fixed mounted, just can’t deliver the results like a NOPTIC. The vehicle mounted NOPTIC thermal imaging camera enables you to conduct quick and easy night vision surveillance with its highly acclaimed panning and tilting capabilities. In addition, the ability to pan and tilt the camera, with the spotlight off, allows for the timely and tactical use of the spotlight. NV3 Noptic 7.5Hz, thermal imager, with converter box e/w rca connection / >7.5 FPS. The NOPTIC Spotlight System includes a thermal imaging camera mounted on spotlight head assembly, 9 ft cable for routing under dash, and signal conversion box with RCA video output. Does not include video monitor. If trunk cable routing is needed, optional 12 ft jumper should be purchased. 

Hand-held TI devices can spend 99% of their time in the trunk or back at the office, but the NOPTIC is at work all night every night. Since the camera uses passive infrared sensing technology, it is not affected by oncoming headlights. The camera operates in complete darkness and at temperature extremes of – 40F to 176F. It also has a built-in lens heater that activates automatically at temperatures below 40 degrees F to keep the lens clear of frost and ice.

FEATURES
SPECIFICATIONS
IR sensor type Passive IR
uncooled microbolometer
IR spectral range 8-14 micrometer
IR sensitivity NEdT <100 mK
Sensor array size 320 x 240 pixels
Video output Composite (monochrome) video, Standard NTSC
Supply voltage 9-16V (operating range)
Protected against over voltage, 
jump start, reverse battery
Power consumption 2 Watts
EMC requirement Conform to functional classification level
Camera size (WxHxL) / weight 2.3" x 2.2" x 2.9" (58 x 56 x 72mm)
Less than 1.0 lb.
Mounting provisions A-Pillar spotlight
Operating temperature -40°F to +175°F (operating range)
-65°F to +200°F (non-operating range)
Altitude Functional up to 12,000 ft @ +185°F
Storage up to 39,000 ft @ -65°F
Enclosure resistance High-pressure cleaning
Salt spray
Solar radiation
View image In-vehicle image viewing via onboard computer screen, video screen or additional LCD monitor/video camera NTSC compatible
Built-in lens heater Activates automatically at temperatures below 40°F
Write a Review

Related Products

Customers Also Viewed